Make Your Own Pucker Bikini Bottoms

So, when I first saw a picture of these I didn't find them attractive. But after looking at some more pictures, I have definitely fallen in love! That was until I saw the price tag: $40 for the pucker bottom look.



Really? Well guess what? I can show you how to make them in less than 10 minutes from ANY bikini bottom you have. If you are like "Tristan! WTF is a "pucker" bottom?!" look below!

Be forewarned! You are about to see lots of girl's bottoms! 

 

This is what is known as a full pucker. It goes from top to bottom on the bum.

 

This is a "partial" or "half" pucker. It only goes down halfway down the bikini.

 

Another full pucker.

FYI, I manipulate photos for art and the skin on these photographs have been professionally manipulated! So don't feel bad!

So by now, your probably wondering, "Tristan! Just get to how I make a set of these out of my old bottoms!", well here's how!


Here's what you need to do a full pucker:

• Sewing needle
• Sewing thread that matches your bottoms
• A pencil
• 10 minutes

Step One

• Find the center of your bottoms
• Take your pencil and draw a zig-zag pattern from bottom to top.

Step Two

• Follow your pencil line with the needle and thread

Step Three

• Once you get to the top, before you tie-off, pull on the string and scoot your bikini bottoms down.
• Before you tie-off, try on the bottoms (watch out for the needle!). Make sure they are comfy and still cover everything (the tighter the you pull the string, the farther down the bikini goes)!

Step Four

• Tie-off the string and viola! A cheap $2 full pucker bikini bottom!
• Note: For a half pucker, start at the top and go halfway down with your zig-zag!

Here is a before picture of a bottom that I did a full pucker on!

Here is a full pucker bottom that I did using this method:

So there ya go! Cheap and easy to make "pucker" bikini bottoms!


~Hawk